Specimen Type
Describes the specimen type validated for testing
Serum Red
Specimen Required
Defines the optimal specimen required to perform the test and the preferred volume to complete testing
***Must submit one specimen per order. Specimens cannot be shared between multiple orders.***
Specimen Type: Serum
Collection Container/Tube: Red
Submission Container/Tube: Plastic vial
Specimen Volume: 3 mL
Collection Instructions:
1. Draw blood in a plain, red-top tube(s). Serum gel tube is not acceptable.
2. Centrifuge and send 3 mL of serum frozen in a plastic, preservative-free vial.
Specimen Minimum Volume
Defines the amount of sample necessary to provide a clinically relevant result as determined by the testing laboratory. The minimum volume is sufficient for one attempt at testing.
Reject Due To
Identifies specimen types and conditions that may cause the specimen to be rejected
Hemolysis | NA |
Lipemia | NA |
Icterus | NA |
Other | Room Temperature; Serum gel tube (SST), Plasma gel tube (PST) |
Specimen Type |
Temperature |
Time |
Special Container |
Serum Red |
Frozen (preferred) |
4 days |
|
|
Refrigerated |
4 days |
|
Reference Values
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.
Reporting limit determined each analysis.
Acetoacetate: None Detected mcg/mL
-Normal range for adults: 5-30 mcg/mL
Method Description
Describes how the test is performed and provides a method-specific reference
Acetoacetate is measured by conversion to acetone after the amount of acetone in the submitted specimen is determined.
PDF Report
Indicates whether the report includes an additional document with charts, images or other enriched information
No
Report Available
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.
9 to 11 days
Specimen Retention Time
Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded
2 weeks
NMS Labs
Fees :
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.
- Authorized users can sign in to Test Prices for detailed fee information.
- Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
- Prospective clients should contact their account representative. For assistance, contact Customer Service.
Test Classification
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.
This test was developed and its performance characteristics determined by NMS Labs. It has not been cleared or approved by the U.S. Food and Drug Administration.
Test Id |
Test Order Name |
Order LOINC Value
|
FACES |
Acetoacetate, Serum |
Not Provided |
Result Id |
Test Result Name |
Result LOINC Value
Applies only to results expressed in units of measure originally reported by the performing laboratory. These values do not apply to results that are converted to other units of measure.
|
Z3524 |
Acetoacetate |
Not Provided |